- Error Ssl Context Is Not Usable Without Certificate And Private Key Bank
- Error Ssl Context Is Not Usable Without Certificate And Private Key West
- Error Ssl Context Is Not Usable Without Certificate And Private Keys
- Error Ssl Context Is Not Usable Without Certificate And Private Keyboard
Certificate Is Not Trusted in Web Browser
How can I find the private key for my SSL certificate 'private.key'.
The new CSR will not be the same since the private key must be different. You may not use the same CSR again, even if it seems convenient. You can test a CSR by using the decoder in the Managed SSL Tab of your GlobalSign accounts. Should you not have that available, you can safely use online resources to check your CSR, as long as you do not. Bug #80335 'SSL context is not usable without certificate and private key' in 5.7.11: Submitted: 11 Feb 2016 7:42: Modified: 10 Mar 2016 13:43: Reporter. Not a member of Pastebin yet? Failed to set up SSL because of the following SSL library error: SSL context is not usable without certificate and private key. The even more uncommon case of no certificates at all. SSL/TLS can also be used without certificates at all, i.e. Not even at the server side. In this case authentication is done with other methods, like a secret key pre-shared between client and server (PSK). These methods are rarely used and browsers don't support these.
The following warnings are presented by web browsers when you access a site that has a security certificate installed (for SSL/TLS data encryption) that cannot be verified by the browser.
Internet Explorer: 'The security certificate presented by this website was not issued by a trusted certificate authority.'
Firefox 3: 'www.example.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown.' or 'www.example.com uses an invalid security certificate. The certificate is not trusted because it is self signed.'
Browsers are made with a built-in list of trusted certificate providers (like DigiCert). For some sites, the certificate provider is not on that list. If this is the case, the browser will warn you that the Certificate Authority (CA) who issued the certificate is not trusted. This issue can also occur if the site has a self-signed certificate. While this warning is fairly generic for Internet Explorer, Firefox 3 will distinguish between a certificate issued by the server itself (a self-signed certificate) and another type of untrusted certificate.
If you have a DigiCert certificate and you receive this error, troubleshoot the problem using the sections below. You do not need to install anything on client devices/applications for a DigiCert SSL Certificate to work properly. The first step is to use our SSL Certificate tester to find the cause of error.
Get SSL Plus certificates for just $207/per year
Buy NowLearn MoreSelf-Signed Certificates
One possible cause of this error is that a self-signed certificate is installed on the server. Self-signed certificates aren't trusted by browsers because they are generated by your server, not by a CA. You can tell if a certificate is self-signed if a CA is not listed in the issuer field in our SSL Certificate tester.
If you find a self-signed certificate on your server after installing a DigiCert certificate, we recommend that you check the installation instructions and make sure that you have completed all of the steps.
If you completed all of the installation steps but are still having an issue, you should generate a new CSR from your server (see the CSR creation instructions) and then reissue the certificate in your DigiCert account by logging in, clicking the order number, and then clicking the reissue link.
Intermediate Certificate Issues
The most common cause of a 'certificate not trusted' error is that the certificate installation was not properly completed on the server (or servers) hosting the site. Use our SSL Certificate tester to check for this issue. In the tester, an incomplete installation shows one certificate file and a broken red chain.
To resolve this problem, install the intermediate certificate (or chain certificate) file to the server that hosts your website. To do that, log into your DigiCert Management Console, click the order number, and then select the certificate download link. This file should be named DigiCertCA.crt. Then follow your server-specific installation instructions to install the intermediate certificate file.
Once you import the intermediate certificate, check the installation again using the SSL Certificate tester. In the tester, an incomplete installation shows multiple certificate files connected by an unbroken blue chain.
Jimmy neutron the pizza is aggressive. Intermediate Certificate Issues (Advanced)
If you receive an error using our SSL Certificate tester, you are using a Windows server, and your certificate's issuer is listed as 'DigiCert High Assurance EV CA-3', please see this article for instructions on troubleshooting a SSL installation error.
Quite imposing plus 4 mac torrent. Creating booklets or arranging complex imposition layouts has never been easier and all without leaving Acrobat!
Below are a few more warning messages for different browsers.
Internet Explorer 6: 'Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate. The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. Do you want to proceed?'
Internet Explorer 7: 'The security certificate presented by this website was not issued by a trusted certificate authority. Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.'
Firefox 3: 'www.example.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown.' or 'www.example.com uses an invalid security certificate. The certificate is not trusted because it is self signed.'
-->The CryptAcquireCertificatePrivateKey function obtains the private key for a certificate. This function is used to obtain access to a user's private key when the user's certificate is available, but the handle of the user's key container is not available. This function can only be used by the owner of a private key and not by any other user.
If a CSP handle and the key container containing a user's private key are available, theCryptGetUserKey function should be used instead.
Syntax
Parameters
pCert
The address of aCERT_CONTEXT structure that contains the certificate context for which a private key will be obtained.
![Error ssl context is not usable without certificate and private key west Error ssl context is not usable without certificate and private key west](https://img2018.cnblogs.com/blog/616321/201905/616321-20190526204947783-1646817490.png)
dwFlags
A set of flags that modify the behavior of this function. This can be zero or a combination of one or more of the following values.
Value | Meaning |
---|---|
| If a handle is already acquired and cached, that same handle is returned. Otherwise, a new handle is acquired and cached by using the certificate's CERT_KEY_CONTEXT_PROP_ID property. When this flag is set, the pfCallerFreeProvOrNCryptKey parameter receives FALSE and the calling application must not release the handle. The handle is freed when the certificate context is freed; however, you must retain the certificate context referenced by the pCert parameter as long as the key is in use, otherwise operations that rely on the key will fail. |
| The public key in the certificate is compared with the public key returned by the cryptographic service provider (CSP). If the keys do not match, the acquisition operation fails and the last error code is set to NTE_BAD_PUBLIC_KEY. If a cached handle is returned, no comparison is made. |
| This function will not attempt to re-create the CERT_KEY_PROV_INFO_PROP_ID property in the certificate context if this property cannot be retrieved. |
| The CSP should not display any user interface (UI) for this context. If the CSP must display UI to operate, the call fails and the NTE_SILENT_CONTEXT error code is set as the last error. |
| Uses the certificate's CERT_KEY_PROV_INFO_PROP_ID property to determine whether caching should be accomplished. For more information about the CERT_KEY_PROV_INFO_PROP_ID property, see CertSetCertificateContextProperty. This function will only use caching if during a previous call, the dwFlags member of theCRYPT_KEY_PROV_INFO structure contained CERT_SET_KEY_CONTEXT_PROP. |
| Any UI that is needed by the CSP or KSP will be a child of the HWND that is supplied in the pvParameters parameter. For a CSP key, using this flag will cause the CryptSetProvParam function with the flag PP_CLIENT_HWND using this HWND to be called with NULL for HCRYPTPROV. For a KSP key, using this flag will cause the NCryptSetProperty function with the NCRYPT_WINDOW_HANDLE_PROPERTY flag to be called using the HWND. Do not use this flag with CRYPT_ACQUIRE_SILENT_FLAG. |
Error Ssl Context Is Not Usable Without Certificate And Private Key Bank
The following flags determine which technology is used to obtain the key. If none of these flags is present, this function will only attempt to obtain the key by using CryptoAPI.
Windows Server 2003 and Windows XP: These flags are not supported.
Value | Meaning |
---|---|
| This function will attempt to obtain the key by using CryptoAPI. If that fails, this function will attempt to obtain the key by using the Cryptography API: Next Generation (CNG). The pdwKeySpec variable receives the CERT_NCRYPT_KEY_SPEC flag if CNG is used to obtain the key. |
| This function will only attempt to obtain the key by using CNG and will not use CryptoAPI to obtain the key. The pdwKeySpec variable receives the CERT_NCRYPT_KEY_SPEC flag if CNG is used to obtain the key. |
| This function will attempt to obtain the key by using CNG. If that fails, this function will attempt to obtain the key by using CryptoAPI. The pdwKeySpec variable receives the CERT_NCRYPT_KEY_SPEC flag if CNG is used to obtain the key. Note CryptoAPI does not support the CNG Diffie-Hellman or DSA asymmetric algorithms. CryptoAPI only supports Diffie-Hellman and DSA public keys through the legacy CSPs. If this flag is set for a certificate that contains a Diffie-Hellman or DSA public key, this function will implicitly change this flag to CRYPT_ACQUIRE_ALLOW_NCRYPT_KEY_FLAG to first attempt to use CryptoAPI to obtain the key. |
pvParameters
If the CRYPT_ACQUIRE_WINDOWS_HANDLE_FLAG is set, then this is the address of an HWND. If the CRYPT_ACQUIRE_WINDOWS_HANDLE_FLAG is not set, then this parameter must be NULL.
Windows Server 2008 R2, Windows 7, Windows Server 2008, Windows Vista, Windows Server 2003 and Windows XP: This parameter was named pvReserved and reserved for future use and must be NULL.
phCryptProvOrNCryptKey
The address of an HCRYPTPROV_OR_NCRYPT_KEY_HANDLE variable that receives the handle of either the CryptoAPI provider or the CNG key. If the pdwKeySpec variable receives the CERT_NCRYPT_KEY_SPEC flag, this is a CNG key handle of type NCRYPT_KEY_HANDLE; otherwise, this is a CryptoAPI provider handle of type HCRYPTPROV.
For more information about when and how to release this handle, see the description of the pfCallerFreeProvOrNCryptKey parameter.
pdwKeySpec
The address of a DWORD variable that receives additional information about the key. This can be one of the following values.
Value | Meaning |
---|---|
| The key pair is a key exchange pair. |
| The key pair is a signature pair. |
| The key is a CNG key. Windows Server 2003 and Windows XP: This value is not supported. |
Error Ssl Context Is Not Usable Without Certificate And Private Key West
pfCallerFreeProvOrNCryptKey
The address of a BOOL variable that receives a value that indicates whether the caller must free the handle returned in the phCryptProvOrNCryptKey variable. This receives FALSE if any of the following is true:
- Public key acquisition or comparison fails.
- The dwFlags parameter contains the CRYPT_ACQUIRE_CACHE_FLAG flag.
- The dwFlags parameter contains the CRYPT_ACQUIRE_USE_PROV_INFO_FLAG flag, the certificate context property is set to CERT_KEY_PROV_INFO_PROP_ID with the CRYPT_KEY_PROV_INFO structure, and the dwFlags member of the CRYPT_KEY_PROV_INFO structure is set to CERT_SET_KEY_CONTEXT_PROP_ID.
If this variable receives TRUE, the caller is responsible for releasing the handle returned in the phCryptProvOrNCryptKey variable. If the pdwKeySpec variable receives the CERT_NCRYPT_KEY_SPEC value, the handle must be released by passing it to the NCryptFreeObject function; otherwise, the handle is released by passing it to the CryptReleaseContext function.
Return value
![Error Ssl Context Is Not Usable Without Certificate And Private Key Error Ssl Context Is Not Usable Without Certificate And Private Key](/uploads/1/1/7/9/117990962/737091318.png)
If the function succeeds, the return value is nonzero (TRUE).
If the function fails, the return value is zero (FALSE). For extended error information, callGetLastError. One possible error code is the following.
Return code | Description |
---|---|
| The public key in the certificate does not match the public key returned by the CSP. This error code is returned if the CRYPT_ACQUIRE_COMPARE_KEY_FLAG is set and the public key in the certificate does not match the public key returned by the cryptographic provider. |
| The dwFlags parameter contained the CRYPT_ACQUIRE_SILENT_FLAG flag and the CSP could not continue an operation without displaying a user interface. |
Remarks
When CRYPT_ACQUIRE_WINDOWS_HANDLE_FLAG is set, the caller must ensure the HWND is valid. If the HWND is no longer valid, for CSP the caller should call CryptSetProvParam using flag PP_CLIENT_HWND with NULL for the HWND and NULL for the HCRYPTPROV. For KSP, the caller should set the NCRYPT_WINDOW_HANDLE_PROPERTY of the ncrypt key to be NULL. When CRYPT_ACQUIRE_WINDOWS_HANDLE_FLAG flag is set for KSP, the NCRYPT_WINDOW_HANDLE_PROPERTY is set on the storage provider and the key. If both calls fail, then the function fails. If only one fails, the function succeeds. Note that setting HWND to NULL effectively removes HWND from the HCRYPTPROV or ncrypt key.
Error Ssl Context Is Not Usable Without Certificate And Private Keys
Examples
Error Ssl Context Is Not Usable Without Certificate And Private Keyboard
For an example that uses this function, see Example C Program: Sending and Receiving a Signed and Encrypted Message.
Requirements
Minimum supported client | Windows XP [desktop apps | UWP apps] |
Minimum supported server | Windows Server 2003 [desktop apps | UWP apps] |
Target Platform | Windows |
Header | wincrypt.h |
Library | Crypt32.lib |
DLL | Crypt32.dll |